Address: Rm 510, Limin Building,. West People’s Road, Zhangdian Zibo City, Shandong Province, P.R.China 255000
Tel: 0086 138 533 88161
Fax :0086 533 2062145
HTTP//:www.jennyever.com
E-mail:jennyever@vip.163.com
   jenny@jennyever.com
   geochina@vip.126.com
Skype ID: jennyever
 

挤出式塑料焊机技术规格
订购号:RFSJ-16
电 压:220V
功 率:螺杆加热600W
传动电机800W
热风1600W
温 度:风温20-650℃
塑料挤出时加热温度:200-300℃
预热热风风量:300L/min
焊条直径尺寸:ф3.0-ф4.0mm
Extrusion Plastic welding machine of Technical Spec Order No.RSFG-16
Voltage:220V?Power Screw heating:600W
Drive motor:800W?Heat blast:1600W
Temperature Wind Temperature:20-650℃,
Heating temperature when plastic is extruding:200-300℃
Pre-warm blast volume:300L/min
Diameter of Welding Rod: ф3.0-ф4.0mm

挤出式塑料焊机技术规格
订购号:RFSJ-30
电 压:220V
功 率:电机1020W
热风3400W
温 度:风温20-650℃
塑料挤出时加热温度:200-300℃
预热热风风量:500L/min
焊条直径尺寸:ф3.0-ф4.0mm
Extrusion Plastic welding machine of Technical Spec Order No.RSFG-30
Voltage:220V?Drive motor:1020W?Heat blast:3400W
Temperature Wind Temperature:20-650℃,
Heating temperature when plastic is extruding:200-300℃
Pre-warm blast volume:500L/min
Diameter of Welding Rod: ф3.0-ф4.0mm

挤出式塑料焊机技术规格
订购号:RFSJ-16C
电 压:220V
功 率:电机800W
热风2000W
温 度:风温20-650℃
塑料挤出时加热温度:200-300℃
预热热风风量:300L/min
焊条直径尺寸:ф3.0-ф4.0mm
Extrusion Plastic welding machine of Technical Spec Order No.RSFG-16C
Voltage:220V?Power Drive motor:800W?Heat blast:2000W
Temperature Wind Temperature:20-650℃,
Heating temperature when plastic is extruding:200-300℃
Pre-warm blast volume:300L/min
Diameter of Welding Rod: ф3.0-ф4.0mm

塑料焊条
专业生产挤出塑料焊枪专用PP、PE、PVCф3.0-5.0mm塑料焊条
Our company specializes in producing PP,PE,PVC plastic rod for plastic torch.
Diameter:3.0-5.0mm

挤出式塑料焊机应用实例

© 2019 Copyright Jennyever International Co.,Ltd.